Check And Maintenance - Cub Cadet 7360SS Service Manual

7-7. CHECK AND MAINTENANCE

(1) BACKLASH
1. Check the backlash at differential case assy ]
and side clearance. In case that the values are
out of the following standard, adjust them.
Item
Backlash at differential case assy
Side clearance at differential case assy 0~0.004
Backlash between diff. ring gear and pinion shaft 0.004~0.012
2. Check the backlash between diff. shaft and
final gear 59T. In case that the backlash is out
of following standard, replace them.
Item
Backlash between final 0.004~0.012
gear and diff.shaft
(2) BRAKE DISK
1. Check the worn out of brake disks. In case
that the measurement value is out of standard,
replace the disks.
Item Standard (in.) Service limit (in.)
Thickness 0.134
of brake disk
(3) BRAKE PEDAL
1. Check the clearance between inner diameter
of bushing on brake pedal R.H. and outer
diameter of brake shaft. In case that the
clearance is out of service limit, replace the
bushing.
Item Standard(in.) Service limit(in.)
Clearance between
inner diameter of
bushing and outer
diameter of shaft
Standard (in.)
0.004~0.015
Standard (in.) Service limit(in.)
0.02
0.126
0.0016~ 0.197
0.0047
131