Replacing The Deck Drive Belt - Cub Cadet RZT 42 Operator's Manual

REPLACING THE DECK DRIVE BELT

• Remove the deck from beneath the tractor, (refer
to Deck Removal on page 25).
• Remove the hex tapping screws securing the belt
covers to the deck and remove the belt from the
spindle pulleys. Refer to Figure 35.
Belt Cover
Idler Pulley
Figure 35
• Install the new belt around the spindle pulleys
and reinstall the belt covers.
• Route the belt rearward between the two idler
pulleys and reinstall the deck following the
instructions in Deck Installation on page 25.
Idler Pulley
29
Belt Cover
'V' Belt