JVC RX-F10S Service Manual page 11

3.11 Removing the speaker terminal board
(See Figs.14 and 15)
• Remove the top cover and DSP board.
(1) From the top side of the main body, disconnect the wires
from the connectors (CN301, CN701, CN725, CN801) on
the speaker terminal board. (See Fig.14.)
(2) From the back side of the main body, remove the two
screws N attaching the speaker terminal board. (See
Fig.15.)
(3) Take out the speaker terminal board from the main body.
3.12 Removing the scart board
(See Figs.14 and 15)
• Remove the top cover and DSP board.
(1) From the top side of the main body, disconnect the card
wires from the connectors
Fig.14.)
(2) From the back side of the main body, remove the two
screws P attaching the scart board. (See Fig.15.)
(3) Take out the scart board from the main body.
CN532 on the scart board. (See
Speaker terminal board
Wires
CN725
CN532
CN701
Scart board
CN301
Fig.14
Speaker
Scart board
terminal board
P
Fig.15
(No.MB264)1-11
CN801
N