Sharp MX-M260 Operation Manual page 36

COPY FUNCTIONS
4
Touch the [X] key.
X 100
Y 100
ZOOM
5
Use the reduction, enlargement, and
[ZOOM] keys (
copy ratio in the horizontal (X)
direction.
64%
50%
XY ZOOM
4%
Y
ZOOM
0%
XY ZOOM
Touch a reduction or enlargement key to set
Note
the approximate ratio, then touch the [
key to decrease the ratio or the [
increase the ratio.
6
Touch the [Y] key.
X
100
Y
ZOOM
34
Downloaded From ManualsPrinter.com Manuals
The [X] key is selected
1
(highlighted) by default,
so there is normally no
need to perform this step
2
(Go to step 5.).
If the [X] key is not
4
highlighted, perform this
step.
/ ) to change the
A fixed ratio key will not
become highlighted
Y
when touched.
The [ZOOM] keys
( / ) can be used to
100
change the ratio in
increments of 1%
Touch the
increase the ratio, or the
CANCEL
key to decrease the
ratio. Continuing to touch
a [ZOOM] key (
makes the ratio change
faster.
50
7
Use the reduction, enlargement, and
[ZOOM] keys (
copy ratio in the vertical (Y) direction.
ZOOM
8
Touch the [OK] key.
129%
200%
400%
key to
9
Make sure that a suitable paper size is
automatically selected, or select
/ )
another size using the [PAPER
SELECT] key.
]
AUTO
] key to
PAPER SELECT
X-50% Y-70%
10
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
Note
/ ) to change the
A fixed ratio key will not
become highlighted
77%
X
when touched.
64%
Y
50%
X
50
If you need to readjust
the horizontal ratio, touch
70
Y
the [X] key again.
ZOOM
CANCEL
OK
E
100
%
PAP
If AUTO PAPER
EXPOSURE
SELECT is enabled, the
appropriate copy paper
A4
size is automatically
selected based on the
original size and selected
copy ratios.
To cancel this function, touch the [CANCEL]
key in the XY ZOOM screen.
).