Delete All Messages; User Display Of Navigation Data - Furuno NX-300-D Operator's Manual

3.5

Delete All Messages

This function deletes all messages NX-300 saves.
1. Press the [MENU] key to open the main menu.
2. Press ! or " to select SYSTEM MENU.
3. Press the [ENT] key to show the SYSTEM MENU.
4. Press " to select DELETE ALL MESSAGES.
5. Press the [ENT] key. The following window appears.
6. Press # to select YES.
7. Press the [ENT] key.
8. Press the [MENU] key or [DISP] key to close the SYSTEM MENU.
3.6

User Display of Navigation Data

The NX-300 can function as nav data display when connected to navigation equipment.
You may choose what data to display in the three cells below the date and time indications on the
nav data display. The choices of data are speed, course, range, bearing, power source voltage
and position in latitude and longitude (not available for "LEFT" or "RIGHT").
1. Press the [MENU] key to open the main menu.
2. Press " to select USER DISPLAY.
3-4
Figure 3-6 DELETE ALL MESSAGES window
01-JAN-00
LARGE
LEFT
Figure 3-7 Location of nav data indications
15:37:40
RIGHT