Install The Software - HP Photosmart R927 User Manual

Note
on the card, rather than in internal memory. To use internal memory and view
images stored there, remove the memory card. To transfer images from internal
memory to an optional memory card, see Move Images to Card under
Playback Menu on page
For information about supported memory cards, see Storage under
on page

Install the software

The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, adjust image quality, and more). See
HP Photosmart Software on page
Note
the HP Customer Care website for more information: www.hp.com/support.
Windows
If your Windows computer does not meet the system requirements as stated on your
camera packaging, HP Photosmart Essential is installed (see
Software on page
1. Close all programs and temporarily disable any virus protection software.
2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click Start, click Run, type
D:\Setup.exe, where D is the letter of your CD drive, then click OK.
3. When the software has finished installing, re-enable virus protection software.
Macintosh
1. Insert the HP Photosmart Software CD into the CD drive.
2. Double-click the CD icon on the computer desktop.
3. Double-click the installer icon, then follow the on-screen instructions.
HP Photosmart R927 Digital Camera
Downloaded from ManualsCamera.com Manuals
Once you install a memory card, all new images and video clips are stored
54.
If you have trouble installing or using the HP Photosmart Software, see
9).
27.
35.
Using the
Specifications
Transferring images without
About the HP Photosmart
9