HP Photosmart R927 User Manual page 44

Chapter 8
I have to recharge the Lithium Ion battery frequently.
● See
● A battery that is new or has not been charged recently must be recharged to reach
full capacity.
● If you have not used the battery for two months or longer, recharge it.
The Lithium Ion battery will not charge.
● Try charging it again after it has drained awhile.
● Use only the approved HP AC power adapter.
● If charging the battery in the HP quick recharger or the spare battery charging bay
of an optional HP Photosmart dock does not work, replace the battery.
The camera does not turn on when I connect to AC power, then disconnect, then
reconnect.
● Insert a battery into the camera.
● Reset the camera (see
● The AC power adapter could be malfunctioning. Try connecting to a different
compatible AC power adapter.
● Try plugging the AC power adapter into a different electrical outlet.
The camera does not respond when I press a button.
● Turn on the camera.
● Most of the camera buttons do not respond when the camera is connected to a
computer through the dock.
● Replace or recharge the battery.
● Reset the camera (see
● Check to see if the memory card is defective. If so, replace the memory card.
● Format the internal memory and/or the memory card (see
optional memory card on page
The camera does not take a picture when I press the Shutter button.
● Press the Shutter button all the way down.
● The memory card or internal memory may be full. Transfer images from the camera
to your computer, then format the internal memory or the memory card (see
and format an optional memory card on page
● The camera may be processing. Wait a few seconds for the camera to finish
processing the last image before taking another picture.
The Image Display is not working.
● The Image Display may have timed out. Press any camera button to wake up the
camera.
● Replace or recharge the battery. If the Image Display does not turn on, remove the
battery and connect to AC power via the dock. If the Image Display still does not
turn on, reset the camera (see
My image is blurry.
● Use Focus Lock (see
● Use a tripod to hold the camera steady, or improve lighting conditions.
44
Downloaded from ManualsCamera.com Manuals
Extending battery life on page
Resetting the camera on page
Resetting the camera on page
Using Focus Lock on page
50.
8).
8). Or replace the card with a new one.
Resetting the camera on page
13).
43).
43).
Install and format an
43).
Install