Hobie Mirage Eclipse 10.5 User Manual page 7

Steering Line Connection
1
Locate the steering
lines exiting the board
and steering cables
exiting the handle
bars.
Installing the Rudder
1
Hook the rud-
der on the
trailing edge of
the slot in the
rudder drum.
Stretch bungee
loop over the
rudder and into
the hook on the
front of the rud-
der. The bungee
will deploy the
rudder into
position.
2
Loop the steer-
ing lines exiting the
board around the
balls connected to the
steering cable on the
handle bar.
Set Up
3
The left steering line
connects to the left
cable, the right line to
the right cable. Make
sure the lines are not
crossed. Grey to grey,
black to black.
7