Philips RQ1180 User Manual page 9

2 Insert the lug of the trimmer into the slot in the top of the
shaver (1). Then press down the trimmer (2) to attach it to the
shaver ('click').
3 Press the on/off button once to switch on the trimmer.
RQ1180: The display lights up for a few seconds.
,
4 You can now start trimming.
5 Press the on/off button once to switch off the trimmer.
RQ1180: The display lights up for a few seconds to show the
,
remaining battery capacity.
6 Pull the trimmer straight off the shaver.
Note: Do not twist the trimming unit while you pull it off the shaver.
7 Insert the lug of the shaving unit into the slot in the top of the
shaver (1). Then press down the shaving unit (2) to attach it to the
shaver ('click').
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the shaver, its accessories and the Jet
Clean System (specific types only).
- The best and most hygienic way to clean the shaver is in the Jet Clean
System (specific types only). You can also rinse the shaver under the tap
or clean it with the brush supplied.
- Clean the shaver after every shave for optimal shaving performance.
- You can clean the outside of the shaver with a damp cloth.
- Regular cleaning guarantees better shaving performance.
Cleaning the shaving unit
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
1 Switch off the shaver. Remove it from the charger or remove it from
the Jet Clean System (specific types only).
English
9