Quick Charge - Philips RQ1180 User Manual

Quick charge

After the shaver has charged for 5 minutes, it contains enough energy for
one shave.
Charging in the charger
1 Insert the small plug into the charger.
2 Unfold the charger ('click').
3 Put the adapter in the wall socket.
4 Put the shaver in the charger (1) and press it backwards until it locks
into place (2).
The display shows that the shaver is charging (see section 'Charging'
,
in chapter 'The display').
Charging in the Jet Clean system (specific types only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
Note: RQ1180 only: when you turn the shaver upside down, the battery
indication on the display is also turned upside down so you can still see to what
level the battery is charged.
4 Place the shaver body in the holder behind the two clips (1) and
press it down until it locks into place (2).
Note: The shaver cannot be placed in the Jet Clean System when the protection
cap is on the shaving unit or when the trimmer is placed on the shaver.
The display shows that the shaver is charging (see chapter 'The
,
display').
English
7