4.1 Searching broadcasting services
After connecting up the digital receiver, you will need to per-
form a service search.
You should set the Search Mode option to Auto for the first
time after connecting up the digital receiver; then the digital
receiver will search for all available services.
You may choose to search only services of a specific trans-
ponder because more than one service are provided via each
Chapter 4
Service Search
To perform service search, se-
lect the Installation
Search menu. You should see a
screen like the left figure.
If you have an antenna booster,
you should set the Antenna
Supply 5V option to On to sup-
ply power to it.
27
Service