Connecting Up Your Digital Receiver; Connecting The Antenna; Connecting To Your Television - Topfield TF 5700 PVRt User Manual

12 Setup

2.4 Connecting up your digital receiver

2.4.1 Connecting the antenna

2.4.2 Connecting to your television

There are several ways to set up the digital receiver. Set up
the digital receiver suitably to your television and other appli-
ances. If you have any problem with your setup or need help,
contact your dealer.
Whatever sort of connection you have between the digital re-
ceiver and the television, you need to connect the digital re-
ceiver to your television antenna so that it can receive digital
television services.
Normally you do that by using a loop cable to link from the
RF LOOP 1 OUT connector to the ANT 2 connector.
NOTE
However, if you are in a weak signal area, or are using a signal
amplifier with more than one output, you may achieve better
results by connecting a cable from the antenna or amplifier di-
rectly to the ANT 2 connector rather than using the loop cable.
If you have another digital receiver, or you want to still re-
ceive analogue channels on your television, link it from the
RF LOOP 2 OUT connector.
Between all the following connectors of your digital receiver,
we recommend you use the first connector to get best picture
Connect the antenna cable to the ANT 1
socket on the back panel of the digital re-
ceiver.
Also, you must ensure that there is a connec-
tion to both the ANT 1 and ANT 2 connectors
on your digital receiver, so that both tuners
work properly.