Denon DBT-1713UD Owner's Manual page 41

Parental Controls
Set the BD and DVD playback settings and password settings.
Setting items
Change Password Change : Changes the password.
0 – 9
Sets the password for Use
changing the parental The default setting is "0000"
control level and parental
control country code of BD
and DVD.
BD Rating Level Level 0 – 254 : Sets the age allowed to play back media. Restricts playback
Sets the parental level for of discs with relevant parental control.
playing BD. No Limit : Does not restrict playing of BD.
DVD Rating Level Level1 – 8 : Sets the parental level for playing DVD.
Sets the parental level for Lock All : Restricts playing of all DVD.
playing DVD. No Limit : Does not restrict playing of DVD.
Country Code Initial setting is United States. Select the parental lock code for another
Sets the standard country country with
parental control.
Applies the parental level of
the set country.
Downloaded From DvDPlayer-Manual.com Denon Manuals
Default settings are underlined.
Setting details
to enter a password to finalize it.
ui
.
DVD
Network
Set Internet connection settings and BD-Live™ settings.
Setting items
Internet Connection Enable : The Internet connection is to be used.
Sets whether the Internet Disable : The Internet connection is not to be used.
connection is to be used
or not.
Information Displays the network information shown below.
Displays the network • Address type
information such as the IP • IP Address
address, subnet mask, etc. • Subnet Mask
• Default Gateway
• DNS1
• DNS2
Connection Test Perform the Internet connection test.
Performs the network • It is recommended to perform the connection test for the first Internet
connection test. connection, or after the IP address or the settings for the network are
changed.
• If connection is not completed, a message is displayed. Check the
connection settings and connection environment.
DHCP Auto : Automatically configures the network via the DHCP function.
Sets how to perform Manual : When connecting to a network that lacks the DHCP function,
network configuration, manually configure the following network settings. Consult with the ISP or
your network administrator for what settings to make. After use
automatically or manually.
value, use
• IP Address : Manually configure the IP address.
Since the factory default
• Subnet Mask : If a xDSL modem or terminal adaptor is directly
setting is "Auto", you
connected to the unit, enter the subnet mask provided by the ISP,
do not need to set items
usually in a document. Usually, "255.255.255.0" is set.
such as the IP address if
• Default Gateway : If the device is connected to a gateway (router),
the DHCP server of the
enter its IP address.
broadband router is set to
• DNS1 : Enter the primary DNS.
"Enable".
• DNS2 : Enter the secondary DNS.
38
General Settings
Default settings are underlined.
Setting details
0 – 9 ENTER
to enter values and then press to finalize them.
v See overleaf
i
to clear