Setting Up The System Upgrade - Samsung BD-P1200 User Manual

Setting up the System
Upgrade
Samsung may offer upgrades to your Blu-ray player's
firmware in the future. To upgrade this firmware you must :
1. Go to samsung.com and refer to 'SUPPORT' page to
download the firmware and burn an update CD.
or
2. Connect this player's LAN terminal to the LAN terminal on
your modem (see page 22) and follow the steps below.
Firmware Upgrade
With the unit in Stop mode/No Disc mode, press the
1
MENU button.
Press the
... ... † †
2
then press the ENTER or √ button.
BD Player
No Disc
Music
Photo
Setup
MOVE
Press the
... ... † †
3
then press the ENTER or √ button.
BD Player
No Disc
Music
Photo
Setup
MOVE
Press the
... ... † †
4
press the ENTER or √ button.
BD Player
No Disc
Title
Music
Photo
Setup
MOVE
Downloaded From Disc-Player.com Samsung Manuals
buttons to select Setup,
Setup
Language Setup
√ √
Title
Audio Setup
√ √
Display Setup
√ √
HDMI Setup
√ √
System Upgrade
√ √
Parental Setup
√ √
SELECT RETURN EXIT
buttons to select System Upgrade,
System Upgrade
Upgrade Start
Title √ √
System Information
√ √
Network Setup
√ √
SELECT RETURN EXIT
buttons to select Update Start, then
System Upgrade
Upgrade Start
√ √
System Information
√ √
Network Setup
√ √
SELECT RETURN EXIT
You will see a window that allows you to check the
5
cable or network connection status.
BD Player
No Disc
System Upgrade
System Information
Title System Upgrade
Network Setup
Music Update Start
Now, Checking
Please wait...
Photo
Setup
MOVE SELECT
If the upgrade is possible : You will see information
on the current and new versions of firmware in a
message box.
BD Player
No Disc
System Upgrade
System Information
System Upgrade
Title
The new update data was found.
Network Setup
Curret Version
XXXXX
Music
Update Start
New Version
XXXXX
Photo
Start
Setup
MOVE SELECT
If the upgrade is not possible : You will see
the following description in the message box.
BD Player
No Disc
System Upgrade
System Information
Title System Upgrade
Network Setup
Ethernet cable is not connected.
Music Please, check the Ethernet cable
Update Start
Photo
OK
Setup
MOVE SELECT
• If the cable is not connected :
" Ethernet cable is not connected. Please, check
the Ethernet cable"
• If the network connection has failed :
" This system can not connected to internet for
update. Please, check the network setup"
• If no later version is released (the latest version
has been already installed) :
"The latest version of the firmware is already
installed. There is no need to update."
• If the player is not in "No Disc" :
"Please maintain "No Disc" state for network
update."
System Upgrade
√ √
√ √
√ √
√ √
RETURN EXIT
System Upgrade
√ √
√ √
√ √
√ √
Cancel
RETURN EXIT
System Upgrade
√ √
√ √
√ √
√ √
RETURN EXIT
English - 45