Connections - Panasonic TH-85VX200W Operating Instructions Manual

Connections

AC cord connection and fi xing, cable fi xing
TH-85VX200W
– AC cord fi xing
Note:
Make sure that the
AC cord is locked on both
the left and right sides.
– Cable fi xing bands
Secure any excess cables with bands as required.
Note:
Two fi xing bands are supplied with this unit. In case of securing cables at three positions, please purchase it separately.
Pass the attached cable
fi xing band through the
clip as shown in the
fi gure.
1
Plug the AC cord into
1
the display unit.
Plug the AC cord until
it clicks.
Fix the AC cord with
2
the clamper.
To secure cables connected to Terminals, wrap the cable fi xing band around them
then pass the pointed end through the locking block, as shown in the fi gure.
While ensuring there is suffi cient slack in cables to minimize stress (especially
in the power cord), fi rmly bind all cables with the supplied fi xing band.
To tighten:
Pull
2
Close
Push until
the hook clicks.
Open
2. Pull off.
1. Keep the
knob pressed.
To loosen:
Push the catch
Unplug the AC cord
Unplug the
AC cord
pressing the
two knobs.
Note:
When disconnecting the AC
cord, be absolutely sure to
disconnect the AC cord plug
at the socket outlet fi rst.
Pull
11