Other Information For This Machine; Laws And Regulations; Duplication And Printing Prohibited; Laser Safety - Ricoh MP C2004 series Read This First Manual

3. Other Information for This Machine

This chapter describes laws and regulations related to this machine.

Laws and Regulations

Duplication and Printing Prohibited

Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing
certain items, consult with your legal advisor.

Laser Safety

Laser Safety for Type 1, 2, 5, and 6
CDRH Regulations
This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This
equipment contains four AlGaInP laser diodes, 655–663 nanometer wavelength for each emitter. The
beam divergence angle is 21 degrees (minimum) and 29 degrees (maximum) in the vertical direction,
and 7 degrees (minimum) and 11 degrees (maximum) in the horizontal direction, and laser beams are
generated in Continuous Wave (CW) mode. The maximum output power of the light source is 10
milliwatt.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Laser Safety for Type 3 and 4
CDRH Regulations
This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This
equipment contains four 4ch-Laser Diode Arrays (4ch-LDA). Laser diodes are AlGaInP, 657–663
nanometer wavelength for each emitter. The beam divergence angle is 16 degrees (minimum) and 25
degrees (maximum) in the vertical direction, and 7 degrees (minimum) and 13 degrees (maximum) in
23