Olympus DS-2300 Online Instructions Manual page 74

Using Voice Recognition Software
Notes on Recording For Voice Recognition
When recording voice to be processed
with voice recognition, set up your
DSS recorder as follows to improve
recognition accuracy.
• Set the microphone sensitivity to "DICT"
( P.22).
• Set the recording mode to "SP" ( P.23).
• Set the Variable Control Voice Actuator
(VCVA) to "OFF" ( P.24).
• Register/enroll your voice in the voice
5
recognition software using the recorder.
• Record in a relatively quiet environment.
• Have the recorder microphone 5 to 10
cm (2 to 4 inches) away from your chin.
74
• Speak normally.
• It is recommended to use the noise-
cancellation microphone ME12, when
recording.
The file recorded in the next condition,
will be a low rate of recognition, which
can not be used for voice recognition.
• A conference or meeting where many
voices are recorded.
• Seminar or lecture where high-level
ambient noise tends to be recorded.