Use Of Each Component; Gauges - Sym Tonik 50 Instruction Manual

7.USE OF EACH COMPONENT

(The following is SYM 4 stroke air-cooling 125 c.c./50 c.c. scooter's basic operation, and they
could vary from different individual models. Please consult the end of this manual.)
§GAUGES §
The panel figure for speedometer may vary from model to model, but the location usually are the same.
Speedometer
Odometer
Fuel meter
CAUTION:
Do not wipe plastic components, e.g. instrument panel, headlight, with organic solvents such as
gasoline...etc to avoid damaging these components.
Speedometer：
Indicates driving speed.
Odometer：
Indicates total accumulated distance traveled.
High Beam Indicator：
This indicator comes on with high beam
headlight is turned on.
Turn (left/right) Signal Indicator：
The left or right Indicator will be flashing
according to the operated directions of turn
signal light switch when it is turned on.
Fuel Meter:
The pointer in this meter shows how much fuel
remains in the tank.
When the pointer stays position "①" , it means
full of gasoline in the fuel tank.
The pointer stays position "②" , it means 50% of
gasoline in the fuel tank.
When the pointer stays position "③" , it means
residual about 1.0 liters in the fuel tank. That is
the reserved gasoline. It can continue to ride
about 30 ~ 50km.
When the pointer stays position "④" , it means
empty in the fuel tank.
7. USE OF EACH COMPONENT
6
Turn Left/Right Signal
Indicator
High Beam Indicator
Engine oil replacement
indicator
Engine oil replacement indicator:
Engine oil replacement indicator is used to
indicate the time tables of engine oil replacement,
the color is expressed as green as usual. When
the vehicle traveling about 1,000 kilometers, the
indicator light turns red. It means that it need to
supply or replace engine oil.
After adding engine oil, insert the key into the
relieve hole as shown, the indicator will change
from red to green.