NETGEAR C6250 User Manual page 63

Add Disconnected Devices to or Remove Them from the Blocked List
If you set up an access list that allows all new devices from accessing your network, you can
specify which devices that are currently not connected to the modem router but that were
connected in the past are blocked from accessing your network when they attempt to
reconnect.
Note: You cannot remove a device from the blocked list after you just placed it
on the blocked list and the device is still connected to the modem router.
(In such a situation, the device would be blocked from accessing your
network when it attempts to reconnect.) To remove such a device, you
must wait until the device disconnects from the modem router.
To add a disconnected device to the blocked list or remove it from the blocked list:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Security > Access Control.
The Access Control page displays.
6. Click the View list of blocked devices not currently connected to the network link.
AC1600 WiFi Cable Modem Router
Secure Your Network
63