NETGEAR C6250 User Manual page 183

7. Enter the traceroute settings.
The following table describes the fields for the traceroute settings on the Diagnostics
page.
Field
Target (IP address or
Name)
Max Hops
Data Size (in bytes)
Base Port
Resolve Host
8. Click the Start Test button.
The Results field displays the results of the ping test.
Note: By default, after 30 hops, a traceroute times out.
9. To refresh the results in the Results field, click the REFRESH button at the bottom of the
field.
10. To remove all information from the Results field, click the Clear Results button.
AC1600 WiFi Cable Modem Router
Description
Enter the IP address or host name of the device that you want to trace.
Enter the maximum number of hops for the trace. By default, the maximum number
of hops is 30.
Enter the size of the probe packet. By default, the probe packet size is 32 bytes.
Enter the port from which the probe packet is sent. By default, the port number is
33434.
If you enter a host name, specify whether the name is resolved to an IP address by
selecting one of the following options from the Resolve Host menu:
• Off. The name is not resolved to an IP address.
• On. The name is resolved to an IP address.
Diagnostics and Troubleshooting
183