NETGEAR C6250 User Manual page 19

With the No setting, the modem router works as a bridge and obtains IP information from
the cable Internet provider.
11. Click the Apply button.
Your settings are saved.
12. Follow the instructions that came with your router or gateway to connect it to the modem
router.
CAUTION:
When the modem router is in bridge mode, you must connect only one
device (your other router) to one of the Ethernet ports on the modem
router. In most cases, an Internet service provider (ISP) provides only one
public IP address and connecting multiple devices can cause conflicts and
can cause your devices to stop working.
AC1600 WiFi Cable Modem Router
Hardware Overview and Setup
19