Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tyre, can be a major inconvenience.
Check the following items before you ride
motorcycle:
●
Fuel level − Fill fuel tank when
necessary.
P. 31
2
●
Throttle − Check for smooth opening and
full closing in all steering positions.
●
Engine oil level − Add engine oil if
necessary. Check for leaks.
●
Coolant level − Add coolant if required.
Check for leaks.
P. 60
2
●
●
●
●
●
●
●
P. 72
2
P. 56
2
Drive chain − Check condition and slack,
adjust and lubricate if necessary.
Brakes − Check operation;
Front and Rear: check brake fluid level and
pads wear.
P. 62, 63
2
Lights and horn − Check that lights,
indicators and horn function properly.
Engine stop switch − Check for proper
function.
Clutch − Check operation;
Adjust freeplay if necessary.
Side stand ignition cut-off system − Check
for proper function.
2
Wheels and tyres − Check condition, air
pressure and adjust if necessary.
P. 65
2
P. 69
2
P. 64
P. 48
2
41