Rear Wheel - Honda NC700X Owner's Manual

❙

Rear Wheel

Removal
1. Support your motorcycle securely and
raise the rear wheel off the ground using
a maintenance stand or a hoist.
2. Loosen the rear axle nut, lock nuts and
turn the adjusting nuts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
3. Remove the rear axle nut.
4. Remove the drive chain from the rear
wheel sprocket by pushing the rear wheel
forward.
Tyre Puncture
Wheel speed sensor (NC700XA only)
Adjusting nut
Lock nut
Rear axle shaft
Drive
chain
Washer
u Removing Wheels
Pulser ring
(NC700XA only)
Rear axle
nut
Washers
Lock nut
Adjusting nut
continued 87