JUKI SC-910N Engineer's Manual page 44

Specified No.
* Simultaneously press
the initial value.
switch and switch
– 40 –
4) Modification of functional setup
When you want to advance the setting No., press
/ switch
When you want to return the setting No., press
/ switch
(Caution) When /
) is held pressing, the setting No. will
return (will advance) continuously.
When the setting No. is advanced (re-
turned), the contents which are before by
one (after by one) will be determined.
So, be careful when changing the contents
( up/down switch is touched).
EXAMPLE) CHANGING THE FLICKER REDUCING
FUNCTION (SETTING No. 5)
Press / switch
to "5". Press switch
set No. to "3" since the current set value is displayed on
LED . (standard "0")
(Caution) Keep pressing
, and the setting value can be changed
continuously.
5) Confirmation of functional setup modification
When the change has been completed, press
/ switch or
changed value.
(Caution)
1. When turning OFF the power before perform-
ing this work, the contents which have been
changed are not updated.
2. Press /
will change to the contents of the setting No.
which is before by one.
3. Press /
will change to the contents of next setting No.
After completing the operation, turn OFF the
power and turn ON the power again to return
to the normal operation.
After completing the operation, turn OFF the power and
turn ON the power again to return to the normal opera-
tion.
, and the setting contents of set No. will return to
to advance the setting No.
to return the setting No.
switch ( /
several times to adjust set No.
three times to change the
switch or
/ switch to specify the
switch , and screen display
switch , and screen display
switch
switch