Table of Contents
Advertisement
3
How to Use the Printer Driver
Adjusting Sharpness
Adjust the sharpness of an image if you feel that the overall appearance of the print result is too
fuzzy.
You can adjust the sharpness of the image by dragging the slider through four settings, left to 0
or right to 3.
[0]
Sharpness correction is not applied.
[1 - 3]
Sharpness processing is done.
The higher the number selected, the sharper the image.
Level Correction
If you feel that the contrast level of the printed image is too low (no modulation of dark areas),
use Level Correction adjustment to strength the contrast. With the Level Correction adjustment,
the bright areas of the original become brighter and the dark areas become darker.
To apply Level Correction, click the Level Correction checkbox on.
When you do not need Level Correction, click to remove the checkmark.
57
Advertisement
Table of Contents
