Panasonic AJ-SPX900E Operating Instructions Manual page 68

When using a BP-90 type battery pack
1
Remove the battery holder.
2
Attaching the battery case to the camera-recorder.
Connect the cable on the camera-recorder to the cable
on the battery case (BP-90 type).
Using a screwdriver, secure the battery case (BP-90
type) to the camera-recorder.
Open the cover and lift the rubber cap so that the screw
tightening hole is visible. Tighten the screws to secure
the battery case to the camera-recorder. Be sure to fully
tighten the screws.
<Notes>
Do not use excess force when lifting the rubber caps
forcibly.
Take special care not to pinch the cable.
Connect
Downloaded From CamcorderManual.com Panasonic Manuals
68
Battery holder
Battery Case
(For BP-90 type)
3
Connect the battery pack plug to the socket inside the
battery case, and insert the battery pack into the case.
Label
surface
<Note>
Make sure you turn OFF the camera-recorder power before
connecting or disconnecting the plug.
4
Setting the battery type.
Select the battery type listed under BATTERY SELECT.
Select BATTERY SELECT from the <BATTERY/P2CARD>
screen on the MAIN OPERATION page.
Please refer to [8-6-2 BATTERY SETTING1] for more
information.