Connecting the camera to the computer
Use the provided USB cable to connect the camera to the computer.
Users running Windows 98/98SE need to install the USB driver before
connecting the camera to the computer.
g"Installing the USB driver" (P.46)
Turn the computer on. Make sure that the camera is off (the
lens barrier should be closed and the monitor turned off).
Connect one end of the USB cable to the USB port on the
computer.
Connect the other end of the USB cable to the USB connector
on the camera.
The camera turns on automatically and the green lamp next to the viewfinder lights.
The first time when the camera is connected to your computer, the computer
automatically installs the software to recognize the camera. What until
recognition is completed.
Press
press the OK button.
48
USB port
or
to select PC and
USB connector
USB
P C
PRINT
EXIT
SELECT
OK