Disassemble The Freezer Drawer; Assemble The Freezer Drawer; Adjusting The Door - Samsung rfg28mesl User Manual

DISASSEMBLE THE FREEZER
DRAWER
1. Push the upper drawer in completely.
2. Remove the tilting pocket ( 1 ) by pulling on both
brackets ( 2 ) upward at the same time.
3. Take out the lower basket ( 3 ) by lifting the
basket up from rail system.
4. Remove four 10 mm hex-head bolts from both
sides.
5. Lift the freezer door up from the rails.
10_ setting up
DA99-03404E-11.indb 10 DA99-03404E-11.indb 10
1
2
3
ASSEMBLE THE FREEZER
DRAWER
To reattach the freezer drawer, assemble parts in
reverse order.
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you
want to make sure the Refrigerator is level so that
you can make fi nal adjustments. If the Refrigerator
is not level, it will not be possible to get the doors
perfectly even.
Insert a fl at-blade screwdriver (-) into a notch on the
left control lever, and turn it count clockwise to level
the refrigerator. (You turn the lever clockwise to lower
the refrigerator and counterclockwise to raise it.)
flat-blade flat-blade Control Control
screwdriver(-) screwdriver(-) Lever Lever
Both control levers must be touching the fl oor
to avoid possible personal injury or property
CAUTION
damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
2015. 5. 7. 2015. 5. 7. 8:08 8:08