Lockups And Software Problems - Dell STUDIO 1537 Setup Manual

• Check if the memory module is compatible
with your computer. Your computer supports
DDR2 memory. For more information about
the type of memory supported by your
computer, see "Basic Specifications" on
page 56.
• Run the Dell Diagnostics (see "Dell
Diagnostics" on page 39).
• Reseat the memory modules (see the
Manual on the Dell Support website at support.
dell.com) to ensure that your computer is
successfully communicating with the memory.

Lockups and Software Problems

If the computer does not start up — Ensure
that the power cable is firmly connected to the
computer and to the electrical outlet.
If a program stops responding — End the
program:
1. Press <Ctrl><Shift><Esc> simultaneously.
2. Click Applications.
Downloaded from LpManual.com Manuals
3. Click the program that is no longer
responding
4. Click End Task.
If a program crashes repeatedly — Check the
software documentation. If necessary, uninstall
and then reinstall the program.
NOTE: Software usually includes
installation instructions in its
Service
documentation or on the CD.
If the computer stops responding —
NOTICE: You might lose data if you are
unable to perform an operating system
shutdown.
Turn the computer off. If you are unable to get a
response by pressing a key on your keyboard or
moving your mouse, press the power button for
at least 8 to 10 seconds until the computer turns
off and then restart your computer.
Solving Problems
35