Canon MV960 Instruction Manual page 112

Direct Print Related Messages
Following messages may appear on the camcorder screen. On printers equipped with an
operation panel, an error number or message displays on the panel. Refer to the printer's
manual for the remedies corresponding to the error numbers or messages.
Message
PAPER ERROR
NO PAPER
PAPER JAM
INK ERROR
NO INK
LOW INK LEVEL
WASTE TANK FULL
FILE ERROR
CANNOT PRINT!
COULD NOT PRINT X
IMAGES
SET PRINT ORDER
PRINT ORDER
ERROR
PRINTER ERROR
PRINT ERROR
HARDWARE ERROR
COMMUNICATION
ERROR
PRINTER IN USE
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
Downloaded From VideoCamera-Manual.com Manuals
112
There is a problem with the paper. The paper is not correctly inserted,
the wrong paper size is inserted, or the ink cannot be used with the
selected paper.
There is no paper.
The paper jammed during printing.
Refer to the printer's manual to solve the problem.
The ink cartridge is not inserted or is out of ink. Refer to the printer's
manual to solve the problem.
The ink cartridge needs to be replaced soon.
Waste tank is full. Refer to the instruction manual of your printer.
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
You attempted to use the print order settings to print X images that were
recorded with another camcorder, with a different compression or were
edited on a computer.
You attempted to print an image from the
[ PRINT] without having set the print order.
You attempted to set more than 998 still images in the print order.
Cancel printing. Turn off the printer and turn it back on. Check the printer
status.
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
Refer to the printer's manual to solve the problem.
The printer is experiencing a data transmission error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
The printer is in use. Check the printer status.
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
Close the printer cover securely.
No print head is installed in the printer or print head is defect. Refer to the
instruction manual of your printer.
Explanation
menu