Product Operating Buttons - Samsung SyncMaster S20A550H User Manual

3-6

Product Operating Buttons

Product Operating Buttons
• Press one of the buttons on the monitor. OSD Guide will appear on the screen.
• If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the
menu for the pressed button appears.
• To go to the menu, press the button on the front of the monitor again.
ICON
MENU
ECO
▲/▼
Using the product
Downloaded from ManualMonitor.com Manuals
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent the settings
from being changed by another person
On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock
function is activated.
Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment
Lock function is disabled.
Even if the OSD Adjustment Lock function is activated, users can adjust the brightness
and contrast and can set up the adjustment function assigned to the [ECO].
Users can set the <Customized Key> to one of the following functions.
• <ECO> - <MAGIC> - <Image Size>
You can set the function of the <Customized Key> by selecting <SETUP&RESET> ->
<Customized Key> in the OSD.
Use these buttons to navigate the menu or to adjust a value in the OSD.
Use this button to control the brightness of the screen.
Use this button to select a function.
If you press the [ ] button when there is no OSD, the input signal (Analog/Digital/HDMI)
is switched. When the input signal is switched by pressing [
turned on, a message displaying the selected input signal appears at the top left of the
screen.
This function is not available for products with an Analog interface only.
DESCRIPTION
] button or the product is
3-6