Product Operating Buttons - Samsung S19B300N User Manual

3-19 Product Operating Buttons

Product Operating Buttons
• Press one of the buttons on the monitor. OSD Guide will appear on the screen.
• If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the
menu for the pressed button appears.
• To go to the menu, press the button on the front of the monitor again.
• To activate a button on the product, tap the area on the bottom of the panel. Tapping around the button label on the front
will not activate the button.
• OSD Guide may vary according to functions and models. Please refer to actual product.
ICON
MENU
▲/▼
3-19
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent the settings
from being changed by another person
On: If you press and hold the MENU button down for 10 seconds, the OSD Adjustment Lock
function is activated.
Off: If you press and hold the MENU button down for 10 seconds again, the OSD Adjustment
Lock function is disabled.
Even if the OSD Adjustment Lock function is activated, users can adjust the brightness
and contrast and can set up the adjustment function assigned to the [ ].
Users can set the <Customized Key> to one of the following functions. If the user presses the
Customized Key [ ] after setting it, the configured function will be performed
• < Angle> - <
• You can set the function of the Customized Key by selecting <SETUP&RESET > ->
<Customized Key> in the OSD.
• The function of the customized key can be changed by pressing the
the customized key window.
Use these buttons to navigate the menu or to adjust a value in the OSD.
Use this button to control the brightness of the screen.
DESCRIPTION
Bright> - <Eco Saving> - <Image Size>
button in
Using the product