Tow Ball - Ford Ranger Owner's Manual

TOW BALL

WARNINGS
Never leave the detached tow ball
arm unsecured inside the vehicle.
This would increase the risk of injury
in an accident.
When not in use, always transport
the tow ball arm securely fastened
inside the luggage compartment.
Take special care when fitting the
tow ball arm as the safety of the
vehicle and the trailer depends on
this.
Do not modify the trailer coupling.
Do not disassemble or repair the tow
ball arm.
Type 1
Inserting the tow ball arm
E137325
WARNING
Make sure that the tow ball arm is
fully engaged in the seat.
Note: A trailer socket and the tow ball arm
seat are provided underneath the rear
bumper.
1. Insert the tow ball arm in to the seat.
Ranger (), EB3B-19G219-ZAB enAUS
Towing
2. Turn the trailer socket down through
90 degrees until it engages in the
correct position.
Removing the tow ball arm
3
E137326
1. Push the lever towards the centre of
the vehicle.
2. Turn the lever anti-clockwise to unlock
the tow ball arm.
3. Remove the tow ball arm.
Type 2
E139242
1. Tighten the bolts to 218 Nm
173
2
1