Table of Contents
Advertisement
Gigaset SL 3501, USA, A31008-L350-U122-2-7619
Maintenance
Simply wipe the base station and handset with a damp cloth or an antistatic wipe.
use a dry cloth as this can cause static discharge.
Never
Never
Never
Never
Troubleshooting
If your telephone does not behave the way you want it to, first try to solve the problem
using the following list.
Fault
No display
No reaction to keystroke
No radio connection to the
base station – E.g. base sta-
tion 1 is flashing
Handset does not ring
You cannot hear
The incoming call number is
not displayed although Cal-
ler ID is set.
The ringer/dialing tone
cannot be heard.
Error beep is generated (de-
scending tone sequence)
The answering machine an-
nounces "PIN is incorrect"
during remote operation
Possible cause
Handset not activated
battery empty
Keypad protection activated
Handset outside the base
station range
Handset not registered
Base station not connected
Ringer off
F
The key
was pressed –
the microphone is "muted"
The telephone number
transmission is blocked or
not available
You have changed the tele-
phone cord on your Gigaset
Wrong input
The system PIN entered is
incorrect or set to 0000
anha.fm
26.06.0
Appendix
Solution
a
Hold down end call key
for 1 second
Charge or replace the batte-
ry (page 5)
ª
Hold down the
key for
1 second
Move closer to the base sta-
tion
Register the handset
(page 54)
Check the connector at base
station (page 3)
Activate the ringer
«
Hold down the
key
Î
Press
, to activate the
microphone
The callers must permit the
transmission of their tele-
phone numbers at their net-
work provider
Ensure, when purchasing a
new cord, that it has the cor-
rect pin assignment (3-4 as-
signment of the telephone
leads).
Repeat the procedure; note
the display and, if necessary,
refer to the operating in-
structions
Re-enter the system PIN or
set a PIN other than 0000
79
Advertisement
Table of Contents
