Olympus FE-150/X-730 Advanced Manual page 24

4 BEEP
OFF (Mute) / LOW / HIGH
5 SHUTTER SOUND
OFF (Mute) / LOW / HIGH
6 VOLUME
2
OFF (Mute) / LOW / HIGH
7 PIXEL MAPPING
The pixel mapping function allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one minute
after taking or viewing pictures to allow the pixel mapping function to perform
properly. If you turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press A.
8 X
The date and time is saved with each image, and is used in the file name.
X
.
2006 200
Y
MOVE
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• For more accurate setting, press A when the time signal hits 00 seconds.
24
Ajusting the volume of operational and the warning tones
O/N : Selects the date format (Y-M-D, M-D-Y, D-M-Y).
.
01 01 01
M D
X/Y : Moves to the previous or next setting.
:
00 00
O/N : Sets the date and time.
SET OK
Ajusting the volume of the shutter sound
Adjusting the volume during movie playback
Adjusting the image processing function
Setting the date and time