Olympus FE-115/X-715 Advanced Manual page 94

Troubleshooting
Possible cause
The colors of pictures look unnatural.
No white in the picture.
Part of the picture is dark.
The lens was partly
blocked by your finger or
the strap.
Pictures you have taken do not appear on the monitor.
The power is off.
The camera is in the
shooting mode.
There are no pictures in
the internal memory or
card.
There is a problem with
the card.
The camera is
connected to a TV.
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
No picture is displayed on the TV when connected to the camera.
The video output signal
is incorrect.
8
The TV video signal
setting is incorrect.
94
Corrective action
Include something white in the picture, or
shoot using [#].
Hold the camera correctly, keeping your
fingers and the strap away from the lens.
Press the power switch to turn the camera
on.
Press k to switch to playback mode.
[NO PICTURE] is displayed on the monitor.
Record pictures.
See "Error codes".
The monitor does not function when the
video cable is connected to the camera.
Cancel protection of the pictures.
Set the video output signal according to the
region where used.
Set the TV to the video input mode.
Ref.
page
P. 32
P. 18
P. 8
P. 9
–
P. 89
P. 44
P. 46
P. 45
P. 45