Philips 220C1SW/00 User Manual

Philips brilliance lcd monitor with usb, 2 ms 220c1sw 22" w c-line 1680 x 1050/format 16:10
Hide thumbs Also See for 220C1SW/00:

Advertisement

Quick Links

e-Manual
Philips LCD Monitor Electronic User's Manual
file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/INDEX.HTM [98-06-23 09:36]

Advertisement

Table of Contents
loading

Summary of Contents for Philips 220C1SW/00

  • Page 1 Philips LCD Monitor Electronic User’s Manual file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/INDEX.HTM [98-06-23 09:36]...
  • Page 2: Safety And Troubleshooting Information

    DC power cord for normal operation. Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care...
  • Page 3 ● ● file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/safety.htm 第 2 頁 / 共 2 [98-06-23 09:36] In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
  • Page 4: Faqs (Frequently Asked Questions)

    What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and . icm)? How do I adjust the resolution? file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_faq.htm 第 1 頁 / 共 8 [98-06-23 09:36] Recommended video mode for Philips 22": 1680x1050 @60Hz. Unplug all cables, then connect your PC to the monitor that you used previously.
  • Page 5 What does the Refresh Rate mean for LCD? Will the LCD screen be resistant to scratches? file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_faq.htm 第 2 頁 / 共 8 [98-06-23 09:36] Simply press the Menu button, the Setup button, then select 'Reset' to recall all of the original factory settings.
  • Page 6 How should I clean the LCD surface? Can I change the color setting of my monitor? file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_faq.htm 第 3 頁 / 共 8 [98-06-23 09:36] certain extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that the panel surface is not subject to any excessive shocks or scratches.
  • Page 7: Screen Adjustments

    RETURN TO TOP OF THE PAGE Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information.
  • Page 8: Lcd Panel Technology

    What is a Liquid Crystal Display? What differentiates passive matrix LCDs from active matrix LCDs? file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_faq.htm 第 5 頁 / 共 8 [98-06-23 09:36] settings -- for add-on peripherals. USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera, for example), and a joystick.
  • Page 9 What kind of wide-angle technology is available? How does it work? Why is there no flicker on an LCD Monitor? file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_faq.htm 第 6 頁 / 共 8 [98-06-23 09:36] each intersection in the grid. In a CRT monitor, a gun shoots electrons and general light by colliding polarized electrons on fluorescent glass.
  • Page 10 European 'Law' that relates to health, safety, environment and consumer protection, much the same as the U.S. National Electrical Code and UL Standards. Yes. Philips LCD monitors conform to the guidelines of TCO Displays 5.0 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability.
  • Page 11 FAQs (Frequently Asked Questions) file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_faq.htm 第 8 頁 / 共 8 [98-06-23 09:36] Because you activate Theft Deterrence function in SmartControl II. Please contact IT manager or Philips Service Center. More information is provided in the Regulatory Information RETURN TO TOP OF THE PAGE...
  • Page 12: Troubleshooting

    (Power LED is white blinking) Screen says AUTO button not working properly Imaging Problems file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_troub.htm 第 1 頁 / 共 3 [98-06-23 09:36] Check these items Make sure the power cord is plugged into the power outlet ● and into the back of the monitor.
  • Page 13 The screen is too bright or too dark An after-image appears An after-image remains after the power has been turned off. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_troub.htm 第 2 頁 / 共 3 [98-06-23 09:36] Press the Auto button. ● Adjust the image position using the Phase/Clock of Setup in ●...
  • Page 14 Adjust white "power on" light For further assistance, refer to the representative. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_troub.htm 第 3 頁 / 共 3 [98-06-23 09:36] The remaining dots are normal characteristic of the liquid ● crystal used in todays technology. Adjust white "power on" light using the power LED of Setup in ●...
  • Page 15: Regulatory Information

    For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 1 頁 / 共 11 [98-06-24 08:52] Congratulations, Your display is designed for both you and the planet! This display carries the TCO Certified label.
  • Page 16 Like all LCD products, this set contains a lamp with Mercury. Please dispose of according to all Local, State and Federal laws. For the disposal or recycling information, contact CE Declaration of Conformity file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 2 頁 / 共 11 [98-06-24 08:52] RETURN TO TOP OF THE PAGE www.epa.gov.tw...
  • Page 17 Normal operation Power Saving Alternative 2 One step Federal Communications Commission (FCC) Notice (U.S. Only) file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 3 頁 / 共 11 [98-06-24 08:52] RETURN TO TOP OF THE PAGE VESA State LED Indicator Power Consumption ON (Active) White <...
  • Page 18 (2) this device must accept any interference received, including interference that may cause undesired operation. Commission Federale de la Communication (FCC Declaration) file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 4 頁 / 共 11 [98-06-24 08:52] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 19 MIC Notice (South Korea Only) Class B Device file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 5 頁 / 共 11 [98-06-24 08:52] Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à...
  • Page 20 A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN- 93/T-42107 and PN-89/E-06251. North Europe (Nordic Countries) Information file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 6 頁 / 共 11 [98-06-24 08:52] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 21 Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 7 頁 / 共 11 [98-06-24 08:52] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 22 Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
  • Page 23 Information Products" or commonly referred to as China RoHS. All products including CRT and LCD monitor which are produced and sold for China market have to meet China RoHS request. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 9 頁 / 共 11 [98-06-24 08:52] 3. Refit the fuse cover.
  • Page 24 Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.
  • Page 25 Regulatory Information RETURN TO TOP OF THE PAGE file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-E...01/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 11 頁 / 共 11 [98-06-24 08:52]...
  • Page 26: Other Related Information

    Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and / or be marked HAR. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_other.htm [98-06-23 09:37] RETURN TO TOP OF THE PAGE...
  • Page 27: About This Manual

    Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version.
  • Page 28 Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/about/about NOTE: This icon indicates important information and tips that help you make better use of your computer system.
  • Page 29: Product Information

    Smartimage SmartContrast Your LCD monitor SmartSaturate SmartSharpness Congratulations on your purchase and welcome to Philips. To fully benefit from the support that Philips offers, register your product at. Technical Specifications Resolution & Preset Modes Philips Pixel Defect Policy Automatic Power Saving...
  • Page 30 Economy, and Off. There are five modes to be selected: Office Work, Image Viewing, Entertainment, Economy, and Off. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 2 頁 / 共 10 [98-06-23 09:38] to launch the SmartImage on screen display; to toggle between Office Work, Image Viewing, Entertainment, Economy, and Off;...
  • Page 31 By reducing your monitor's power consumption, you save on energy costs and extend the lifetime of your monitor. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 3 頁 / 共 10 [98-06-23 09:38] Enhances text and dampens brightness to increase readability and reduce eye strain. This mode...
  • Page 32 Entertainment mode and is turned off for top quality display of office applications and in the Economy mode to reduce power consumptions. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 4 頁 / 共 10 [98-06-23 09:38] RETURN TO TOP OF THE PAGE...
  • Page 33: Technical Specifications

    SCANNING Vertical refresh rate Horizontal Frequency VIDEO Video dot rate Input impedance file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 5 頁 / 共 10 [98-06-23 09:38] TFT LCD 22" visual 0.282 x 0.282 mm 1680 x 1050 pixels R.G.B. vertical stripe Anti-glare polarizer, hard coated 473.76 x 296.1 mm...
  • Page 34 1680 x 1050 at 60 Hz (digital input) B. Recommended Resolution For 220C1 1680 x 1050 at 60 Hz (digital input) 18 factory preset modes: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 6 頁 / 共 10 [98-06-23 09:38] 75 ohm 2.2K ohm 0.7 Vpp Separate sync...
  • Page 35: Automatic Powersaving

    If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: VESA Mode Active Sleep file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 7 頁 / 共 10 [98-06-23 09:38] Resolution V. freq (Hz) 640*350 70.086 720*400 70.087...
  • Page 36: Physical Specifications

    Signal Assignment T.M.D.S. Data2- T.M.D.S. Data2+ T.M.D.S. Data2/4 Shield No connect file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 8 頁 / 共 10 [98-06-23 09:38] < 0.5 W ® compliant. As an ENERGY STAR ® Partner, we have ®...
  • Page 37 Blue video input Sense (GND) Cable detect (GND) Red video ground Green video ground Blue video ground file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 9 頁 / 共 10 [98-06-23 09:38] No connect No connect +5V Power T.M.D.S. Clock Shield Ground (for +5V) T.M.D.S. Clock+ Hot Plug Detect T.M.D.S.
  • Page 38: Product Views

    Follow the links to see various views of the monitor and its components. Front View Product Description Physical Function Tilt file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/product.htm 第 10 頁 / 共 10 [98-06-23 09:38] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 39: Philips' Flat Panel Monitors Pixel Defect Policy

    TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains Pin Assignment the different types of pixel defects and defines acceptable defect levels for each type.
  • Page 40 Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/pix Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is,...
  • Page 41 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
  • Page 42 Philips Pixel Defect Policy * 1 or 2 adjacent sub pixel defects = 1 dot defect RETURN TO TOP OF THE PAGE file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/pix el.htm 第 4 頁 / 共 4 [98-06-23 09:38]...
  • Page 43: Installation

    Sytem support: 2000, XP, NT 4.0, XP 64 Edition, Vista 32/64. IE Support 6.0/7.0. Language support: English, Simplified Chinese, German, Spanish, French, Italian, Russian, Portuguese. Philips Monitor support DDC/CI Interface. Installation: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 1 頁 / 共 17 [98-06-23 09:38]...
  • Page 44 You can adjust more options without wizard by Standard pane. ● Wizard Analog Sequence White Point (Color Temp) 2. Start with Standard pane: Adjust menu: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 2 頁 / 共 17 [98-06-23 09:38] Wizard Digital Sequence Resolution Resolution Focus Contrast...
  • Page 45 Cancel prompts user if you want to cancel installation. ● Tab Heading Adjust Adjust Adjust Adjust Adjust file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 3 頁 / 共 17 [98-06-23 09:38] Sub Menu Display in Analog Brightness Contrast Focus (Clock & Clock Phase) Position Resolution...
  • Page 46: Color Menu

    SmartControl Color menu: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 4 頁 / 共 17 [98-06-23 09:38]...
  • Page 47 Refer to below table for sub-menu item base on your input. ● Example for Color Calibration ● Tab Heading Color Color Color Color Color file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 5 頁 / 共 17 [98-06-23 09:38] Sub Menu Display in Analog Display in Digital Black Level White Point Color Calibration Viewing Mode...
  • Page 48 Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. Must have patent info in calibration screen. First color Calibration Screen: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 6 頁 / 共 17 [98-06-23 09:38]...
  • Page 49 SmartImage - Allows user to change setting for better display setting based on content. When Entertainment is set, SmartContrast and SmartResponse are enabled. Plug-Ins - Asset Management Pane will only be active when selecting Asset Management from the drop-down Plug Ins menu. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 7 頁 / 共 17 [98-06-23 09:38]...
  • Page 50 Plug-Ins - Theft Deterrence Pane will only be active when selecting Theft Deterrence Mode from the drop-down Plug Ins menu. To enable Theft Deterrence, clicking Enable Theft Mode button brings up the following screen: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 8 頁 / 共 17 [98-06-23 09:38]...
  • Page 51 Does not require the display be attached to a different host to go into theft mode. Once a PIN is entered and accepted, the following dialog box appears: Click on No button takes user to the following screen. ● file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU...B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 9 頁 / 共 17 [98-06-23 09:38]...
  • Page 52 After entering PIN, Accept button disables PIN. Cancel button opens up main Theft Deterrence pane, displaying Theft Deterrence Disabled. Enable Theft Mode and PIN Options buttons. Entering incorrect PIN results in the following dialog box: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 10 頁 / 共 17 [98-06-23 09:38]...
  • Page 53 Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non- supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl II tabs are not available. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 11 頁 / 共 17 [98-06-23 09:38]...
  • Page 54 Options>Audio - Will only be active when selecting Volume from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Option>Auto Pivot file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 12 頁 / 共 17 [98-06-23 09:38]...
  • Page 55 Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non- supported display capable of DDC/CI, only the Help and Options tabs are available. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 13 頁 / 共 17 [98-06-23 09:38]...
  • Page 56 Facoty Preset can also be called from the drop down menu. Tune Display - Opens the SmartControl II control panel. Fly off for SmartImage - Check current settings, Off, Office Work, ImageViewing, Entertainment, Economy. Task Tray Menu Enabled file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 14 頁 / 共 17 [98-06-23 09:38]...
  • Page 57 When the Task Tray is disabled in the preference folder, only the EXIT selection is available. To completely remove SmartControll II from the task tray, disable Run at Startup in Options>Preferences. Q&A file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 15 頁 / 共 17 [98-06-23 09:38]...
  • Page 58 Install the driver. Remove SmartControl, and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported. Please pay attention to Philips web site for any updated SmartControl driver available.
  • Page 59 SmartControl RETURN TO TOP OF THE PAGE file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/product/SMART.HTM 第 17 頁 / 共 17 [98-06-23 09:38]...
  • Page 60: Installing Your Lcd Monitor

    The Base Getting Started Optimizing Performance Input Rear View file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/install/install.htm 第 1 頁 / 共 3 [98-06-23 09:39] To switch monitor's power On and Off To access the OSD menu To adjust the OSD menu Change to 4:3 display To change the signal input source...
  • Page 61: Optimizing Performance

    For best performance, ensure that your display settings are set at 1680x1050, 60Hz. ● Note: once. The current display mode is shown in OSD main controls called RESOLUTION. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/install/install.htm 第 2 頁 / 共 3 [98-06-23 09:39] USB downstream port USB upstream port VGA input DVI-D input (available for selective models)
  • Page 62 Installing Your LCD Monitor file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/install/install.htm 第 3 頁 / 共 3 [98-06-23 09:39]...
  • Page 63: Connecting To Your Pc

    Accessory Pack Getting Started Unpack all the parts. Optimizing Performance The Base Connecting to Your PC file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/INSTALL/CONNECT.HTM 第 1 頁 / 共 3 [98-06-23 19:04] DVI cable (Optional) Power cord VGA cable (Optional) RETURN TO TOP OF THE PAGE EDFU pack...
  • Page 64 Connecting to Your PC Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/INSTALL/CONNECT.HTM 第 2 頁 / 共 3 [98-06-23 19:04] *available for selective models *available for selective models...
  • Page 65 Connecting to Your PC Connect to PC file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDF...V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/INSTALL/CONNECT.HTM 第 3 頁 / 共 3 [98-06-23 19:04] Turn off your computer and unplug its power cable. Connect the monitor signal cable to the video connector on the back of your computer.
  • Page 66 Place the monitor face down on a smooth surface taking care to avoid scratching or Optimizing Performance damaging the screen. Attach the Base Stand Detach the Base Stand Hold the monitor base with both hands and firmly insert the base stand into the base column. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/install/base.htm 第 1 頁 / 共 2 [98-06-23 09:39]...
  • Page 67 Place the monitor face on a safe surface, push down on the release button and pull the base stand away from the monitor body. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/install/base.htm 第 2 頁 / 共 2 [98-06-23 09:39] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 68: Your Lcd Monitor

    Use the information file ( .inf) for Windows® 98/2000/XP/Vista or later Getting Started The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Optimizing Performance Windows® 98/2000/XP/Vista. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows®...
  • Page 69 If your Windows® 98/2000/XP/Vista version is different or you need more detailed installation information, please refer to your Windows® 98/2000/XP/Vista user's manual. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/install/gt_start.htm 第 2 頁 / 共 3 [98-06-23 09:40] Click on the 'Finish' button then the 'Close' button.
  • Page 70 Getting Started RETURN TO TOP OF THE PAGE file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/install/gt_start.htm 第 3 頁 / 共 3 [98-06-23 09:40]...
  • Page 71: Description Of The On Screen Display

    Description of the On Screen Display What is the On-Screen Display? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
  • Page 72 Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/osd/osddesc.htm 第 2 頁 / 共 3 [98-06-23 09:40]...
  • Page 73 Use 1680x1050@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/osd/osddesc.htm 第 3 頁 / 共 3 [98-06-23 09:40] RETURN TO TOP OF THE PAGE...
  • Page 74 NORTH AMERICA: PACIFIC: ASIA: Philippines Singapore Taiwan Thailand Vietnam AFRICA: MIDDLE EAST: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warranty.htm [98-06-23 09:40] Austria Belgium Denmark France Germany Czech Republic Hungary Russia Slovakia Slovenia Argentina Brasil Canada USA Australia New Zealand China Hong Kong India Indonesia Korea Malaysia Pakistan...
  • Page 75: Your Philips F1Rst Choice Warranty

    Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective. Philips aims at a swap within 48 hours of your call being received.
  • Page 76 Note that products that are not originally designed, manufactured, approved and/or authorized for usage within the Philips F1rst Choice countries, do not apply to the Philips F1rst Choice Warranty. In these cases the Philips global warranty terms are valid.
  • Page 77 Your Philips F1rst Choice Warranty file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/war_1st.htm 第 3 頁 / 共 3 [98-06-23 09:41]...
  • Page 78: F1Rst Choice Contact Information

    Greece Ireland Italy Luxembourg The Netherlands Norway Poland Portugal Spain Sweden Switzerland United Kingdom file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warfirst.htm [98-06-23 09:42] Code Telephone number Tariff 0810 000206 € 0.07 078 250851 € 0.06 3525 8761 Local call tariff +358 09 2290 1908 Local call tariff 082161 1658 €...
  • Page 79: Your Guarantee In Central And Eastern Europe

    Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase.
  • Page 80 In order to avoid unnecessary inconvenience, we advise you to read the operating instructions carefully before contacting our dealers or Information Centers In case your Philips product is not working correctly or is defective, please contact your Philips dealer or directly the Website: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/war_ee.htm 第...
  • Page 81: Consumer Information Centers

    Tel: +359 2 960 2360 www.lan-service.bg CZECH REPUBLIC General Consumer Information Center 800 142100 Xpectrum Lu.ná 591/4 CZ - 160 00 Praha 6 Tel: 800 100 697 or 220 121 435 Email:info@xpectrum.cz www.xpectrum.cz file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warcic.htm 第 1 頁 / 共 9 [98-06-23 09:42]...
  • Page 82 LATVIA ServiceNet LV Jelgavas iela 36 LV - 1055 Riga, Tel: +371 7460399 Email: serviss@servicenet.lv LITHUANIA ServiceNet LT Gaiziunu G. 3 LT - 3009 KAUNAS Tel: +370 7400088 Email: servisas@servicenet.lt www.servicenet.lt file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warcic.htm 第 2 頁 / 共 9 [98-06-23 09:42]...
  • Page 83 SI - 1236 Trzin Tel: +386 1 530 08 24 Email: servis@pchand.si RUSSIA 18, Shelepihinskaya nab. 123290 Moscow Russia Tel. +7(495)797 3434 Profservice: 14A -3, 2Karacharovskaya str, 109202, Moscow , Russia Tel. +7(095)170-5401 file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warcic.htm 第 3 頁 / 共 9 [98-06-23 09:42]...
  • Page 84 (C1107ADZ) Cdad. de Buenos Aires Tel: 0800 3330 856 Email: CIC.monitores@Philips.com BRASIL Alameda Raja Gabaglia, 188 - 10°Andar - V. Olímpia - S. Paulo/SP - CEP 04551-090 - Brasil Tel: 0800-7254101 Email: CIC.monitores@Philips.com Pacific file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warcic.htm 第 4 頁 / 共 9 [98-06-23 09:42]...
  • Page 85 E-mail: enquiry@phkservice.com.hk Service Hours: Mon.~Sat. 09:00am~06:00pm India Company: REDINGTON INDIA LTD Address: SPL Guindy House, 95 Mount Road, Chennai 600032, India Tel: +9144-42243352/353 E-mail: aftersales@in.aocmonitor.com Service hours: Mon.~Fri. 9:00AM~5:30PM; Sat. 9:00AM~1:00PM file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warcic.htm 第 5 頁 / 共 9 [98-06-23 09:42]...
  • Page 86 Fax: 021-7510982 E-mail: gepta@cbn.net.id Service hours: Mon.~Fri. 8:30am~4:30pm; Sat. 8:30am~2:00pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakarta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakarta Pusat. Phone: 021-3455150, 34835453 3.
  • Page 87 Consumer Information Centers Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: consumer.care.sg@philips.com Service hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm Taiwan Company: FETEC.CO...
  • Page 88 Company name: Sylvara Technologies Pty Ltd Address: Ho Address Palm Springs Centre Christoffel Road Van Riebeeck Park Kempton Park, South Africa Tel: +27878084456 Fax: +2711 391 1060 E-mail: customercare@philipssupport.co.za Service hours: Mon.~ Fri. 08:00am~05:00pm Middle East file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warcic.htm 第 8 頁 / 共 9 [98-06-23 09:42]...
  • Page 89 Address: 13 Rozanis St. P.O.B. 39300, Tel Aviv 61392 Israel Tel: 1-800-567000 call free in Israel; (972-50-8353722 after service hours until 20:00) Fax: 972-3-6458759 E-mail: eastronics@eastronics.co.il Service hours: Sun.~Thurs. 08:00 - 18:00 file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/warcic.htm 第 9 頁 / 共 9 [98-06-23 09:42]...
  • Page 90: Your International Guarantee

    In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.
  • Page 91 International Guarantee file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/warranty/war_intl.htm 第 2 頁 / 共 2 [98-06-23 09:42]...
  • Page 92 Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase.
  • Page 93 ● Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 94 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 95 ● Just a phone call away Philips customer help desks are located worldwide. Within the U.S. you can contact Philips customer care Monday-Friday from 8:00 AM-9:00 PM Eastern Time (ET) and on Saturdays from 10:00 AM-5:00 PM ET hrs by using one of the contact phone numbers.
  • Page 96 The width-to-height ratio of the active area of a display. In general, most monitors have an aspect ratio of 4:3. Wide monitors or TVs have an aspect ratio of 16:9 or 16:10. Backlight file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/glossary/glossary.htm 第 1 頁 / 共 10 [98-06-23 09:43] G H I R S T U V...
  • Page 97: Color Temperature

    (degrees Kelvin). Lower Kelvin temperatures such as 2400° K are red; higher temperatures such as 9300° K are blue. Neutral temperature is white, at 6504° K. Philips monitors generally offers 9300° K, 6500° K, and user define. Contrast The luminance variation between light and dark areas in an image.
  • Page 98: Contrast Ratio

    The DVI interface enables: file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/glossary/glossary.htm 第 3 頁 / 共 10 [98-06-23 09:43] RETURN TO TOP OF THE PAGE Reduce signal loss and video noise in signal due to less signal conversion.
  • Page 99 Color defined as having hue are know as chromatic colors. White, black, and grays possess no hue. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/glossary/glossary.htm 第 4 頁 / 共 10 [98-06-23 09:43] RETURN TO TOP OF THE PAGE = 256 levels. For a color...
  • Page 100: Liquid Crystal

    A measure of the brightness or luminous intensity of light, usually expressed in units of Candelas per square meter (cd/m2) or foot Lamberts. 1 fL=3.426 cd/m2. A unit of luminance equal to 1 cd/m2 or 0.292 ftL. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/glossary/glossary.htm 第 5 頁 / 共 10 [98-06-23 09:43] RETURN TO TOP OF THE PAGE...
  • Page 101: Refresh Rate

    & phase, position, RGB, white point and - on models with onboard speakers - volume adjustments. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/glossary/glossary.htm 第 6 頁 / 共 10 [98-06-23 09:43]...
  • Page 102 Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.
  • Page 103 Microsoft's Vista requirements from each and every monitor that leaves the factory - not just a few review samples. Only Philips goes to these lengths to deliver this exacting level of color accuracy and display quality in every new monitor.
  • Page 104 Universal Serial Bus; for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and logical. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/glossary/glossary.htm 第 9 頁 / 共 10 [98-06-23 09:43]...
  • Page 105 Vertical refresh rate Expressed in Hz, it is the number of frames (complete pictures) written to the screen every second. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5...0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/glossary/glossary.htm 第 10 頁 / 共 10 [98-06-23 09:43] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 106: Download And Print

    Disk'. 3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/download/download.htm 第 1 頁 / 共 2 [98-06-23 09:43] Adobe® Acrobat Reader for Apple Macintosh. 220C1.pdf...
  • Page 107: Printing Instructions

    Download and Print Printing instructions: To print the manual: With the manual file open, follow your printer's instructions and print the pages you need. file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/download/download.htm 第 2 頁 / 共 2 [98-06-23 09:43] RETURN TO TOP OF THE PAGE...

This manual is also suitable for:

220c1220c1sb/05220c1sb/00220c1sb220c1sw

Table of Contents