Advertisement
Preface ...................................................................................................................................... 2
Precautions ................................................................................................................................ 2
Major Operating Controls .......................................................................................................... 4
Installations ................................................................................................................................ 5
Specifications ............................................................................................................................ 12
Standard Accessories ................................................................................................................ 12
Preface
This ceiling mount bracket is exclusively designed to mount the camera on a ceiling. Refer to the
catalog or the installation guide of the camera for supported cameras.
This bracket can be used for an area with weak pull-out strength such as plasterboard in a double
ceiling.
This bracket is an embedded type to reduce the exposed portion of the camera body.
Precautions
•
Refer installation work to the dealer.
Installation work requires technique and experiences. Failure to observe this may cause fire,
electric shock, injury, or damage to the product. Be sure to consult the dealer.
•
Avoid installing this bracket in the locations where salt damage occurs or corrosive
gas is produced.
Otherwise, the mounting portions will deteriorate and accidents such as a fall of the camera
may occur.
•
Use only the specified camera.
Failure to observe this may cause a fall of an inappropriate camera resulting in injury or acci-
dents. Refer to the catalog or the installation guide of the camera for supported cameras.
•
The screws and fixation mechanisms shall be tightened securely.
Failure to observe this may cause a fall of the camera resulting in injury.
•
The measures of protection against a fall of the camera shall be taken.
Failure to observe this may cause injury. Be sure to install the safety wire.
•
Select an installation area that can support the total weight.
If a selected area is too weak to support the total weight, a fall of the product may occur result-
ing in injury. Installation work shall be started after sufficient reinforcement.
2
CONTENTS
Advertisement
