If Correct Focus Cannot Be Obtained; Determine The Position Of The Subject After Focusing (Focus Lock) - Olympus CAMEDIA D-535 ZOOM Reference Manual

If correct focus cannot be obtained

When the subject to be focused is not on the AF target mark (not positioned
in the center of the composition), you can use the following steps to obtain the
correct focus on the subject. This operation is referred to as "focus lock".

Determine the position of the subject after focusing (Focus Lock)

1
Press the power switch.
• The camera turns on in the shooting
mode.
• The lens extends and the monitor turns
on.
• The orange lamp lights.
3
2
Turn the mode dial and select a
shooting mode.
"Shooting mode" (P.36)
3
Position the AF target mark on
the subject you want to focus on.
• When shooting a hard-to-focus
subject, point the camera at an object
about the same distance away as the
subject.
42
Shutter button
Power switch
Mode dial
AF target mark