Remote Control Unit; Timer Recording - Samsung DVD-SR150M Instruction Manual

Hide thumbs Also See for DVD-SR150M:
Table of Contents

Advertisement

Sound
No sound.
Checkpoint 1
Are you watching a programme in slow or skip
mode?
If you are playing a programme at a speed other
than normal speed, sound will not be heard.
(Except for forward search (X 2) in disc.)
Checkpoint 2
Check the connections and settings. (See pages
20~21, 31~32)
Checkpoint 3
Check whether the disc is damaged. Clean the
disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Checkpoint 1
Check whether you have selected the correct
digital output options in the Audio Output
Options menu.
(See pages 31~32)

Timer Recording

Timer lamp fl ickers.
Checkpoint 1
Check there is enough space in the disc for
recording.
Checkpoint 2
Check whether the current disc is recordable or
not.
Make sure to check before the start time of
recording.
Timer recording does not work properly.
Checkpoint 1
Re-check the recording time and the end time
settings again.
Checkpoint 2
Recording will be cancelled if the power is
interrupted due to a power failure or another
similar reason while recording.
Downloaded From Disc-Player.com Samsung Manuals

Remote Control Unit

The remote control doesn't work.
Checkpoint 1
Point the remote control at the remote control
sensor on your DVD Recorder. Allow for proper
distance. Remove obstacles between your DVD
Recorder and the remote control.
Checkpoint 2
Check whether the batteries are drained.
Checkpoint 3
Check the TV/DVD selection button setting.
Checkpoint 4
Check whether TV, DVD control button is
selected or not.
Other
I forgot my password for parental supervision.
Checkpoint 1
Press and hold the PROG (
the front panel of the Recorder for more than 5
seconds with no disc in the unit. All settings
including the password will revert to the factory
settings. Do not use this unless absolutely
necessary.
(Note that this function is possible only when
no disc is inserted.)
Is it possible to change a subtitle and an audio signal on
a recorded disc?
Checkpoint 1
A recorded disc is played with only the subtitle
and the audio signal which were selected
during recording.
Other problems.
Checkpoint 1
Read the table of contents and then fi nd and
read the section describing your problem,
follow the instructions given.
Checkpoint 2
Plug your DVD Recorder off and on.
Checkpoint 3
If the problem still persists, contact a nearby
Samsung service centre.
English - 90
) buttons on

Advertisement

Table of Contents
loading

Table of Contents