Transporting; With Outboard Motor Installed On Boat; With Outboard Motor Removed From Boat - Honda bf50d Owner's Manual

TRANSPORTING

WITH OUTBOARD MOTOR
INSTALLED ON BOAT
When trailering a boat with the
outboard motor attached, always
disconnect the fuel line from the
portable fuel tank.
LH and LHT Types
(tiller handle)
STEERING FRICTION ADJUSTER
TO INCREASE
TO DECREASE
FRICTION
FRICTION
(LOCK)
(FREE)
Tighten the steering friction adjuster
to prevent the outboard motor from
moving while trailering the boat.
102
LRT and XRT Types
(remote control)
Use an outboard motor support bar to
prevent the outboard motor from
moving while trailering the boat.
Refer to the manufacturer's
instructions for using an outboard
motor support bar.
All Types
The preferred method is to leave the
engine in the normal running
position, but if there is insufficient
road clearance, you can tilt the
outboard motor using a commercially
available outboard motor support bar
available through your dealer. Refer
to the manufacturer's instructions for
using an outboard motor support bar.
OUTBOARD MOTOR SUPPORT BAR
(commercially available)
WITH OUTBOARD MOTOR
REMOVED FROM BOAT
Secure the outboard motor in either
the vertical or horizontal position
shown on p. 101.