Error Message - Olympus C-570 Instruction Manual

Error message

When one of the messages below is
displayed on the monitor, check the
corrective action.
Error message
q
CARD ERROR
q
WRITE
PROTECT
>
MEMORY FULL
q
CARD FULL
CARD SETUP
CLEAN CARD
FORMAT
SET
MEMORY SETUP
POWER OFF
MEMORY FORMAT
SET
L
NO PICTURE
r
PICTURE
ERROR
r
THE IMAGE
CANNOT
BE EDITED
42 EN
Corrective action
Card problem
Insert a new card.
Card problem
Use a computer to cancel the
read-only setting.
Internal memory problem
• Insert a card.
• Erase unwanted images.
Card problem
• Replace the card.
• Erase unwanted images.
Card problem
• Use kl to select
[CLEAN CARD], and press the
B button. Take out the card,
wipe the contact area (p. 46)
with a soft, dry cloth, and then
load the card again.
• Use kl to select
OK
[FORMAT], and press the
B button. Next, use kl
to select [YES], and press the
B button.
*2
Internal memory problem
IN
Use kl to select
[MEMORY FORMAT], and press
the B button. Next, use kl
to select [YES], and press the
OK
B button.
*2
Internal memory/Card problem
Take pictures before viewing
them.
Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image fi le
is corrupted.
Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.
CARD-COVER
OPEN
g
BATTERY
EMPTY
NO
CONNECTION
*1
NO PAPER
*1
NO INK
JAMMED
SETTINGS
CHANGED
*3
PRINT ERROR
r
CANNOT PRINT
Before erasing important images, download them to
*1
a computer.
All data will be erased.
*2
This is displayed, for instance, when the printer's
*3
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
*4 This camera may be unable to print images taken by
other cameras.
Operation problem
Close the battery/card
compartment cover.
Battery problem
Charge the battery.
Connection problem
Connect the camera and
computer or printer correctly.
Printer problem
Load paper into the printer.
Printer problem
Refi ll the ink in the printer.
Printer problem
Remove the jammed paper.
Printer problem
Return to the status where the
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
Problem with selected image
Use a computer to print.
*4