One-Touch White Balance - Olympus CAMEDIA C-500 ZOOM Advanced Manual

One-touch white balance

Top menu [MODE MENU]
1
Display the [ONE TOUCH WB]
screen and point the camera at a
sheet of white paper.
• Position the paper so that it fills the
screen, making sure there are no
shadows.
2
Press Z.
• The white balance is set and the screen returns to the mode menu.
Note
• When setting the white balance by pointing the camera at a sheet of white
paper, the correct setting may not be obtained if the light reflected by the paper
is too bright or too dark.
• White balance may not be effective under some special light sources.
• After setting a white balance other than [AUTO], play back the picture and
check the colors on the monitor.
• When the flash is fired with a white balance setting other than [AUTO], colors may
appear different in the resulting picture from the colors you see on the monitor.
• When using situation-related modes, the white balance is automatically set
according to each mode.
[PICTURE] [WB]
g"How to use the menus" (P. 16)
Adjusting picture coloration
[V]
ONE TOUCH WB
CANCEL CANCEL CANCEL GO GO GO
P 1/1000 1/1000 F2.8 F2.8
2560 1920 2560 1920
HQ HQ
One-touch white balance
4
OK OK OK
0.0 0.0
5 5
49