Optional Accessories - Symbol P460 Product Reference Manual

Problem
The Scanner will not
load my ADF rule.
Note: If after performing these checks the symbol still does not scan,
contact your distributor or call the Symbol Support Center. See
Symbol Support Center

Optional Accessories

Optional accessories include various stands and holders, which are supplied at extra cost.
One such optional accessory is the IntelliStand. When the scanner is inserted in the
IntelliStand, it enables hands-free presentation scanning. It permits the Phaser to scan
continuously and automatically read a bar code when one is presented in front of the
scanner without an operator pulling the trigger. The Phaser must be operating from a cable
with an external power supply to work with the IntelliStand, as it cannot work with battery
power under these conditions. For more information about the IntelliStand, refer to the
IntelliStand Quick Reference Guide, p/n 70-11567-xx.
Table 4-1. Troubleshooting Table (Continued)
Possible Causes
The scanner is running
an MCL-Designer
generated application.
on page
Maintenance And Specifications
Possible Solutions
Software download or scanning a bar code sheet
while the scanner is running an MCL-Designer
generated application
• Erase the MCL-Designer application
from the scanner's memory by scanning
the "Reset Default Application" bar code
on page 3-17.
• The default application is now
reinstalled and an ADF rule can be
loaded.
page xi for the telephone number.
4-5