Inserting/Removing A Memory Card; Opening The Monitor - Ricoh Pentax K-70 Start Manual

Inserting/Removing a Memory Card

1
Make sure that the camera is turned off.
2
Slide the memory card
cover in the direction of 1
and then rotate it to open
as shown by 2.
3
Insert a card all the way
into the memory card slot
with the memory card label
facing toward the side with
the monitor.
Push the memory card in once
and release to remove.
4
Rotate the memory card
cover as shown by 3, and
slide it in the direction of
4.

Opening the Monitor

1
Open and rotate the
monitor 180° to the left
while holding the top and
bottom of it.
1
2
2
Rotate the monitor 180°
backward.
The monitor can also be rotated
up to 90° forward.
3
Close the monitor on the
camera so that the LCD
screen can be seen.
4
3
29