Table of Contents
Advertisement
Basic adjustment settings
Channel memory setting
Press MENU and the MENU screen displays.
Press
~/~
to select "Setup".
Press ..
IT
to select "CH Setup", and then
press ENTER.
• If you already set the Secret No" input the 4-
digit secret number here. See page 68 for
setting a secret number.
Press ..
IT
to select "CH Memory", and then
press ENTER.
Press ..
IT
to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press ENTER.
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the "Antenna Setup - DIGITAL"
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU and the MENU screen displays.
Press ......
/~
to select "Setup".
Press ..
IT
to select "Antenna Setup -
DIGITAL", and then press ENTER.
• If you already set the Secret No., input the
4-
digit secret number here. See page 68 for
setting a secret number.
CQID
-38
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
CD
Press ..
IT,
and then press .... /~ te> select
the channel to skip or not.
®
Press ..
IT
to select "Skip", and then press
....
/~
to select "On" or "Off".
When viewing DIGITAL broadcasts:
CD
Press ..
IT
to select the channel to skip or
not, and then press ....
/~
to select "On" or
"Off".
• On: Skips channels. (Channel selection disabled using
CHl\ly.)
• Off: Does not skip channels. (Channel selection enabled
using
CHl\ly.)
B'l~~
• Make sure what kind of connection is made with your TV.
Press ..
IT
to select "Signal Strength".
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Channel Strength
• The channel signal strength can also be checked
separately.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL -
Air.
Press ..
IT
to select "Channel Strength", and
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
• This function is available for DIGITAL (Air) only.
Advertisement
Table of Contents
