Menu Mode; Menu Structure; Main Display - Lennox CLIMATIC 200 User Manual

MENU MODE

Press and
mode on off
to get to the menu mode
Press and
mode on off
Press and
mode
on off

MENU STRUCTURE

MAIN DISPLAY

It shows:
Inlet water temperature
Active alarms
Water temperature adjustment menu.
Status temperature probes menu:
St1: Inlet water temperature.
St2: Outlet water temperature.
St3 and St6: Piping temperature/pression.
St4: Outdoor temperature (with option Dynamic set point).
Active alarms Menu.
Configuration parameters menu.
Password to access to parameters configuration (number); the password is 38.
Operating hours resources management (compressor, water pump).
buttons and
buttons simultaneously and
buttons simultaneously
LEVEL 1
SET POINT
Probe status
ALARMS
PARAMETERS
PASSWORD
OPERATING HOURS
, to enable the user
LEVEL 2
Cooling set point
Heating set point
Codes
Active alarms Codes
Password value (number 38)
Compressor operating
hours
Water pump operating hours
8
When the leds on the
display flash alternatively
from one to the other, you
are on menu mode.
LEVEL 3
Set point value cool
Set point value heat
Probe value
Amount of hours
Amount of hours