MODIFY PARAMETERS
Menu of configuration parameters of the unit.
General configuration parameters of the unit (Values (H)).
Configuration parameters concerning to compressor (Values (C)).
Configuration parameters concerning to fan and defrost control (Values (F)).
Configuration parameters concerning to active alarms (Values (A)).
Configuration parameters concerning to water pump (Values (P)).
Configuration parameters concerning to anti-freeze (Values (r)).
Configuration parameters concerning to defrost cycle (Values (d)).
To access to parameters modification, a password should be included to the system; this is not necessary if you only want to
see the parameters.
It shows:
Inlet water temperature
Active alarms
MAIN DISPLAY
It shows:
Inlet water temperature
Active alarms
When the leds on the
display flash alternatively
from one to the other, you
are on menu mode.
mode
on off
PASSWORD
mode
on off
PARAMETERS
mode
on off
Insert password
(number 38)
13
mode
on off