3.5mm Pin
Signal name
#
6
PLUGDET
5
HS EAR L
4
HS EAR R
3
HS MIC
1, 2
HS GND
Sensors and switches
Battery cover switch
Battery cover switch A Hall switch is used for back cover removal detection.
SD lid switch
A mechanical switch is used for SD cover opening detection.
Camera position sensors
Two detector switches are used to detect cameras in / out position and whether it has been pointed towards
or away from the user.
Magneto resistive sensor is used to detect the camera in/out position and mechanical switch to detect the
rotation angle.
Baseband technical specifications
External interfaces
External interfaces
Name of connection
Connector reference
Charger
Page 9 –14
Figure 67 Nokia AV connector
Table 15 Pin/signal orders
Direction
Input
Output
Output
Input
-
Table 16 External interfaces
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Terminal internal connection, plug
detection
Audio output
Audio output
Microphone audio & send/end button
info
Ground contacts
Connector reference
X1110
X1100
System Module
Description
Issue 2
RX-34