Configuring Ap#1: - Motorola AP-51 series Product Reference Manual

Hide thumbs Also See for AP-51 series:

Table of Contents

AP#1 and AP#2 will be configured somewhat the same. However there are some important (yet

subtle) differences. Therefore, the configuration of each access point will be described separately.

9.3.1.1 Configuring AP#1:

1. Provide a known IP address for the LAN1 interface.

NOTE Enable the LAN1 Interface of AP#1 as a DHCP Server if you intend to

2. Assign a Mesh STP Priority of 40000 to LAN1 Interface.

associate MUs and require them to obtain an IP address via DHCP.

Configuring Mesh Networking